 |
 |
|
Products |
Home » Products
» Power Distribution MV, HV and EHV Equipments » Static Var Compensator
|
Static Var Compensator
|
 |
TQC was the first of its kind in the world, developed in 1973 for extra-high tension applications. In addition to compensating for voltage flicker caused by power systems, it also has the advantages of harmonic current compensation and power factor improvement. This helps prevent flickering of lighting and stoppages of equipment such as invertors |
Features |
1. High Speed Response |
Much faster than other methods: response of 5 seconds or less. |
2. Stepless, Continuous Compensation |
By thyristor phase control method. |
3. Low Operating Loss |
Operating power loss is much less than that of the equivalent synchronous condenser, which results in saring the power expenses. |
4. Improvement of Power Factor and Distortion Wave |
By the use of capacitors for harmonics absorption and power factor improvement. |
5. Easy Operation and Maintenance |
By the use of our well-known and trusted oil filled equipment and thyristor devices. |
6. Economical |
The TQC will be able to be installed in parallel, according to the load increasing in the future. |
7. No Limitation for installation site |
More economical when Compared with other forms of suppression , for an example, grade up of line voltage. |
|
Outline Dimensions |
Capacity [MVA] |
W [mm] |
D [mm] |
H [mm] |
10 |
15,000 |
12,000 |
3,800 |
20 |
17,000 |
15,000 |
4,200 |
30 |
18,000 |
18,000 |
4,600 |
50 |
20,000 |
18,000 |
5,000 |
Note: We have given estimates for equipment up to 100 MVA |
|
|
Ratings |
Phase Number |
3 |
Frequency |
50Hz or 60Hz |
Voltage Below |
154kV |
|
|
|
 |
|
|
|
|
|
|
|